1. Check the Weather Forecast:

Before taking any action, monitor the local weather forecast regularly. Specifically, pay attention to temperatures and severe weather alerts, especially if they predict temperatures below 33.8°F or severe weather conditions.

2. Identify Extreme Cold Alert:

If the forecast indicates temperatures below 33.8°F for an extended period, or if there is a severe weather alert, it's time to take precautionary measures for your Odin Plunge.

3. Turn Off the Odin Plunge:

Ensure that the Odin Plunge is turned off completely. This prevents any potential damage during the draining process.

4. Locate the Drain Valve:

Identify the drain valve on your Odin Plunge. This is usually located at the bottom of the unit. View our How to drain in our help centre. 

Ensure that the water is completely drained from the Plunge. This step is crucial to prevent freezing and potential damage. 

5. Unfasten the Filter:

Locate and unfasten the filter from the Odin Ice Bath. Empty the filter to remove any debris or water that may be trapped.Consult your user manual your filter guide on page 10. 

5. Loosen the Pipe to the Pump:

Loosen the pipe that goes directly to the pump. Carefully pull it off to ensure there isn't any water remaining in the pump. This step helps prevent damage caused by freezing water in the pump.

6. Clean the Odin Ice Bath:

Once drained, clean the interior of the Ice Bath, including the filter and pump area, to remove any residual water or debris. This helps maintain the unit and ensures it's ready for future use.

7. Store Indoors:

If possible move the Odin Ice Bath to an indoor storage location. This can be a garage, shed, or any other suitable indoor space that protects it from extreme cold temperatures and severe weather.

8. Regularly Monitor Weather Updates:

Stay informed about weather conditions and, if necessary, repeat this process periodically during the winter months to prevent any unexpected damage.

By following these updated steps, you can effectively drain, clean, and store your Odin Ice Bath, including additional precautions to safeguard the filter and pump components.

Our Hot & Cold Odin Plunge is not designed for use in during the winter months, the Plunge chiller has an Ambient temperature sensor that is designed to turn the machine off if the ambient temperature is below 2°C(35.6°F). During the Winter months we highly reccomend follwing out PREPARE YOUR ODIN PLUNGE FOR WINTER GUIDE.

Below, we'll walk you through the three key scenarios that require you to fully drain your Odin Plunge and store the chiller and water filter canister indoors. Afterward, we'll dive into the steps to keep your Odin Plunge operational in winter.

Extreme Cold Alert (Below 10°F):

When the weather forecast predicts an ambient temperature below 10°F for an extended period, it's time to take action.

Fully drain your Odin Plunge to prevent freezing and store the chiller and water filter canister inside to protect them from the cold.

Follow our step by step on properly draining and storing your Odin Plunge to shield from the harshest winter conditions.

Severe Weather Alert:

If your local weather forecast predicts severe conditions, such as extreme cold, heavy storms, or other significant weather events, it's essential to act proactively.

Fully drain your Odin Plunge to safeguard it from potential damage and store the chiller and water filter canister indoors for their protection. 

Follow our step by step on properly draining and storing your Odin Plunge 

Extended Absence:

When you won't be around for more than 24 hours or when a winter storm is looming, follow these steps to protect your Odin Plunge.

Fully drain your Odin Plunge to safeguard it from potential damage and store the chiller and water filter canister indoors for their protection.

For a home-use we recommend replacing the water in the Odin every 2-3 months, depending on the degree of use and your own personal preferences.

For commercial use we recommend changing the water in the Odin minimum once a week (depending of the volume of people using the Ice Bath & Plunge) 

For residential use you do not need to add chlorine as every Odin comes with an ozone generator. You also have an optional upgrade of UV sanitisation as well which will keep your bath cleaner for longer!

For commercial application most states require chlorine to be added to the water when you have multiple different clients. Always seek professional advice on water quality from your Local/ State city council & local pool/ spa shop. 

1. ENSURE the power to the Odin is turned off prior to commencing draining.

2. Locate Drain Outlet:

• Find the drain at the bottom of The Odin Plunge, connected to an elbow pipe. 
• Prepare garden hose: Grab the 18mm (3/4in) garden hose attachment for draining. 

3. Attach Hose: 

• Connect one end of the garden hose to the elbow pipe. 

4. Position Hose Outlet: 

• Place the other end of the hose in an appropriate drainage area.

5. Release Drain Seal: 

• Press the plug on the elbow pipe to start draining. 

6. Monitor Draining: 

• Keep an eye on the process to ensure smooth drainage. 

7. Wait for Completion: 

• Allow the Odin to drain completely. 

8. Detach Hose:

• Disconnect the garden hose once draining is done. 

9. Secure Drain Components: 

• Close the plug on the elbow pipe to seal the drain.

We recommend deep cleaning The Odin Plunge every 2 - 3 months for residential customers and minimum once a month for Commercial Clients (depending of the volume of people using the Plunge) 

We recommend the Wanda Battery Powered Spa Vacuum

https://shop.spaworld.com.au/wanda-battery-powered-spa-vacuum

The Odin Plunge feature a reusable 50 micron filter, which can last 6-12 months.

(Residential)

Recommended cleaning schedule:

For everyday personal use - clean/replace filter every 3-4 weeks, depending on degree of use and your personal preferences.

(Commercial)

Recommended cleaning schedule:

For heavy/commercial use -clean/replace filter every 1-2 weeks for your client peace-of-mind.

If you are using the Odin in conjunction with a sauna or after exercise, the filter will clog up faster, as heat opens up the pores to expose the Plunge to oils and sweat. If you’re noticing a significant reduction in flow rate, that is an indicator of the filter needing to be replaced.

Replacement filters can be purchased off our shop page.

The cedar can be wiped down with a cloth. Please re-stain the cedar every 6-12 months to keep it looking fresh.

The Odin Plunge models require the Steel Bands to be checked and tightened every 1 - 2 months to ensure it remains firm and keeps the wooden staves in place.

Tools required:
17mm open-ended spanner.

Instructions:

1. Locate the nut at one end of the steel band.
2. Using the spanner, turn to the right until firm.

Please Note: Do not over tighten.

Please use either a stainless steel cleaner/methylated spirits/WD40 with a cloth to wipe down (please do after each time the tub is drained to ensure it is clean)

Please be advised that your Odin Plunge is weather resistant, not weatherproof, due to the electronics in the chiller as well as the Red Western Cedar staves and MUST be undercover and in shade if outdoors or if indoors it’s in a well-ventilated space away from Saunas or Steam Rooms. Ensuring that the Odin is undercover, away from direct sunlight and not kept in warmer climates exceeding 107°F is an important part of maximizing the life of the Odin Plunge.

If your Odin Plunge is being located indoors and the ambient temperature exceeds 107°F or if located outdoors in direct sunlight, the cooling performance will be impacted by 50% (it will be 50% less efficient). This can cause issues on cooling down your Odin Plunge. In higher temperatures, the Odin has to cool more frequently than when in cooler rooms or undercover.

Ambient temperature plays an important role in scenarios such as:

• The functionality of the Chiller and its ability to reach set temperatures.
• Ensuring the Chiller is not overheating causing the Odin Plunge to not cool.

My Odin Plunge has no power:

• Unplug your Odin Plunge from the outlet and plug it into a separate outlet to check if there is still no power.
• Please check there is nothing else in your house causing an electrical trip as this may be an internal electrical issue.
• Please check there is no water leaking onto any of the electrical components in the Chiller unit.

How to troubleshoot leaking Odin Plunge connections.
Condensation occurs when water vapour in the air comes into contact with a surface that has a lower temperature than “the dew point” of the surrounding air.

To determine if The Odin Plunge may be creating condensation, please see factors below that may create condensation to form on some of the components of The Odin Plunge.

If The Odin Plunge is in direct sunlight, outside in high temperatures or high humidity, inside in a room with minimum air flow, near saunas or steam rooms these are all factors which cause condensation.

On the Odin Plunge you may find condensation in two areas:

1. The chiller in the areas pictured below

2. The bath waste (pictured below)

If you are still unsure whether or not your Odin has condensation or if it is leaking please turn off your Odin for a minimum of 24 hours with the insulation lid off and allow it to get down to room temperature 75°F. This will help determine whether or not it was the condensation creating water to drip or if there may be a leak.

The Odin Plunge:

Please refer to our Maintenance Tab to ensure you are continuously maintaining the water quality and the cleanliness of The Odin Plunge and its filters.

• Please ensure that you or your customers are showering prior to entering the Odin Plunge as sweat, grime, and sand can affect the filtration and the quality of the water.
• Please do not use Magnesium, Epsom Salts, or any other similar products as this can affect the Filter.
• For Commercial customers, we do recommend the use of Chlorine or alternatively Hydrogen Peroxide.

** Please consult directly with your local city/state council and your local pool/spa with water sampling for testing.**

Click HERE For a full comprehensive User Manual for the Odin Plunge.

Extended Warranty:
Comprehensive 2-year warranty on cosmetic components, 1 year on working components. Covers stainless steel tub, cooling compressor, plumbing, and electrical elements.

For American orders, the USD prices listed include shipping to all lower 48 states in America. For Alaska and Hawaii please email for a quote.

**Please note: Puerto Rico is NOT considered part of America and will incur additional shipping costs.

For international orders, shipping may be similar to the USD pricing, but varies depending on your exact location. If you can contact us with a shipping address and your model of interest we will provide a shipping estimate.

ALL CUSTOMERS: Additional duties or customs fees will be payable by you; it is recommended you contact customs authorities in your country to ascertain if any such fees apply.