Odin Hot Tubs

The Odin Hot Tubs are available in three sizes: Original, XL and Dual.

The Original is comfortable for most users measuring up to approximately 6'2" (187cm).

The XL is recommended for users over 6'2" or for those who want a bit of extra legroom.

The Dual can comfortably accommodate two people plunging at once.

For Australian orders the Odin comes fully assembled on a custom-built pallet to your door! Free-standing, with no plumbing needed! The only installation required is for a qualified Electrician to install a safety switch prior to plugging in your Odin - a task that takes a matter of minutes to complete. Once that has been connected you simply plug in, fill up and turn on! (See FAQs for further info)

We recommend staining the cedar every 6-12 months to keep it fresh - just depending on your personal preferences.

For a home-use bath we recommend replacing the reusable filter every 3-4 weeks, and the water can be replaced every 2-3 months, depending on your personal preferences.

For commercial-use we recommend replacing the reusable filter more frequently for your client peace-of-mind, and replacing the water every 1-2 months, depending on degree of use. Chlorine is compatible with all components of the Odin.

**Please note: the Odin is designed to be kept under cover and out of direct sunlight and harsh weather. Please see FAQs for more info.

Every Odin comes with a custom-fitted insulated lockable spa lid to protect against debris and increase the efficiency of maintaining the desired temperature.

All models of the Odin operate on 220-240v power and use a standard 10amp household power socket.

Every model comes equipped with an RCD safety plug and is designed to be left on 24/7.

The Odin uses marine grade 316 stainless steel and 100% clear western red cedar. We start with a coil of stainless steel and a pile of raw cedar and hand-make the Odin into the product you know and love!

Five-year limited warranty on the cosmetic components, such as the stainless steel tub and the cedar.

Three-year warranty on the working components, which includes the cooling compressor, plumbing and electrical.

MEAUSREMENTS ARE IN MILLIMETRES (mm)

Interior = the inner stainless steel section of the Odin- the part that you sit in.

Exterior = the full outside dimensions of the Odin, including the housing step.

IMPORTANT: An additional 300mm (minimum) of clearance is needed in front of the housing step to allow sufficient room to access the filter within for maintenance. Please add an additional 300mm to the EXTERNAL WIDTH (W) measurements below when considering the total area required to house the Odin.

Original Pro Interior - 1200L × 800W × 600H

Original Pro External - 1300L × 1370W × 740H

XL Pro Interior - 1500L × 800W × 600H

XL Pro Exterior - 1600L × 1410W × 740H

Dual Pro Interior - 1640L × 1040W × 600H

Dual Pro Exterior - 1740L × 1650W × 740H

MEAUSREMENTS ARE IN INCHES (in)

Interior = the inner stainless steel section of the Odin - the part that you sit in.

Exterior = the full outside dimensions of the Odin, including the housing step.

IMPORTANT: An additional 12in (minimum) of clearance is needed in front of the housing step to allow sufficient room to access the filter within for maintenance. Please add an additional 12in to the EXTERNAL WIDTH (W) measurements below when considering the total area required to house the Odin.

Original Pro Interior - 47.2 L × 31.5 W × 23.6 H approx.

Original Pro External - 51.2 L × 53.9 W × 29.1 H approx.

XL Pro Interior - 59 L × 31.5 W × 23.6 H approx.

XL Pro Exterior - 63.0 L × 55.5 W × 29.1 H approx.

Dual Pro Interior - 64.6 L × 40.9 W × 23.6 H approx.

Dual Pro Exterior - 68.5 L × 64.9 W × 29.1 H approx.